Granite Pavers Driveway Contractor Smithtown NY
This driveway was constructed with a 10 inch RCA base and granite pavers were installed on one inch of fine sand. The paving stone sizes were 6”x 9”, with a flamed and tumbled texture finish. These granite pavers are 1-1/4” thick and can be used for pedestrian and vehicular trafficked areas. The joints in between the pavers were filled with polymeric sand, then compacted with a mechanical vibratory plate and sealed. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at http://www.gappsi.com
East Setauket NY Backyard Designer and Builder
Complete backyard design and installation by Gappsi.
Including swimming pool, outdoor kitchen, fireplace, pavilion, Fiorito travertine patio, pool coping and cultured stone veneered sitting walls.
Granite Driveway and Masonry Installation, Dix Hills NY 11746, by Gappsi
The driveway installation started with the excavation of existing asphalt and sub base. New concrete base with fiber mesh was installed with Amagansett granite pavers is laid over a thin layer of graded sand. Stone was selected from the Gappsi natural stone collection. Jumbo Belgian block was installed for the street curb and driveway entrance. The sealing process begins with pressure washing the entire patio, removing all dirt/debris from the stone surface and in between the joints. Next, Nexgel Techniseal synthetic sand is applied in between the pavers joints and vibrated with a mechanical plate compactor. The plate compactor has rubber rollers to prevent the stones from cracking or scratching. This vibrating process allows the sand to fall in between the joints and density. Then, we clean the pavers with brooms and landscape blowers, to clean the excess sand from the pavers surface and to evenly spread the sand in between the pavers joints. The next step is to wash the pavers by misting water to penetrate the synthetic sand into the paver joints all the way down below the pavers. The sand and water activate a chemical reaction of the pollen that’s in the sand to cause the sand to harden. Finally, the application of the sealer, two parts components urethane dealer, specially formulated for Gappsi, is applied to the pavers surface and the sand joints to prevent stones from staining, extend their life cycle and further enhance their texture, color, and surface. From design concept to finish execution Gappsi provides natural stone supply/installation, Cleaning and sealing services. For more information about design and installation in Dix Hills NY, visit http://www.gappsi.com or call us at 631-543-1177 for a free estimate.
Construction of Vinyl Pool in Nesconset, NY 11767, by Gappsi
This 16′ by 32′ vinyl pool was built with concrete walls and liner. The pool has steps across the full width of the shallow end and a standing ledge/two corner benches in the deep end. The pool is also equipped with an auto cover. Stoops were built by backyard sliding doors with platforms and several steps going down to the backyard level. Patio pavers and pool coping used were Griggio Dorato travertine pavers selected from the Gappsi stone collection. The travertine colors vary in grays, beige, whites, and blacks. It has a very soft marbleized style that can compliment any home sidings and backyard furniture. If you’re looking for vinyl pool and pavers installation, visit http://www.gappsi.com or contact us at 631-543-1177.
Travertine coping and pavers supplier West Islip Long island NY 11730
West Chester stone veneers installation Long Island NY
This outdoor fireplace was constructed with masonry blocks and then veneered outside with west Chester stones, the fire box was veneered with firebricks.
To Learn more about gappsi products, please visit gappsi.com or call 631-543-1177